Canon PIXMA MX300 Driver Manual Download

Canon PIXMA MX300 Driver and Manual Download for Windows, MacOS, and Linux. Many people think that the portable printer such as Canon PIXMA MX300 is not something worth to buy. That is because, in term of performance, this kind of printer is not something that will give you the satisfaction that you need. The best thing from this kind of printer is the portable function. That is what many people said, but if you have seen this printer, you will notice that this printer is not that kind of common portable printer.

Related Printer Driver: Canon MG8120 Driver

OVERVIEWSPECIFICATIONSHOW TO INSTALLDOWNLOAD

Download Canon PIXMA MX300 Multifunction Printer Driver, User’s Manual and Software, Compatible Systems for Windows (64-Bit/32-Bit), MacOS, and Linux.

PIXMA MX300 Printer Specifications

Printer:
  • print resolution: 600 x 600 dpi black; 4800 x 1200 dpi color
  • print speed:
    • text documents: up to 22 pages per minute in black; up to 17 pages per minute color
    • photos: 4″ x 6″ prints in approximately 46 seconds
  • direct photo printing with PictBridge-compliant cameras
Scanner:
  • optical resolution: 600 x 1200 dpi (19,200 x 19,200 dpi interpolated)
  • 48-bit color depth
  • maximum document size: 8-1/2″ x 11-11/16″
Copier:
  • copy speed for text documents: up to 22 copies per minute in black; up to 17 copies per minute color
  • reduction/enlargement: 25-400%

METHOD 1: Canon MX300 DRIVERS INSTALLATION – DOWNLOADED DRIVER SETUP FILE

For this method, you will not need an installation CD to install the driver of Canon PIXMA MX300 printers.

Things needed:

  1. A file of Canon PIXMA MX300 driver setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the PIXMA MX300 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon PIXMA MX300 driver using the setup file downloaded beforehand:

  1. Both your computer and the Canon MX300 Printer need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the PIXMA MX300 printer just yet. Wait until you are instructed otherwise.
  3. If you have not, download the Canon MX300 drivers setup file. Once done, install the file on your computer. Instructions given on the screen must be followed thoroughly for the file to install properly.
  4. Once installation completes, connect your computer to PIXMA MX300 Printer using the provided USB cable. Your computer should be able to detect the printers automatically. Once detected, more instructions are given.
  5. Displayed instructions should be followed thoroughly to complete the installation.
  6. Canon PIXMA MX300 should be ready for use by now.

METHOD 2: Canon PIXMA MX300 DRIVER INSTALLATION – MANUAL INSTALLATION

For this method, accessing your computer’s Windows’ “Add a printer” feature is required.

Things needed:

  1. A file of Canon MX300 drivers setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the MX300 printers. The cable should come with the package. Check your box for the cable.

Steps of manual installation of Canon PIXMA MX300:

  1. Both your computer and the Canon MX300 Printer need to be turned on first.
  2. You can connect your computer to your Canon PIXMA MX300 printers using the provided USB cable.
  3. Specify a location (folder) on your computer to extract the PIXMA MX300 setup file into. If you can’t find the file, try looking for it on the TEMP folder of your computer.
  4. For Windows 7 and Windows Vista users: open Control Panel, open View Devices & Printer. For Windows XP users: open Fax & Printers.
  5. Choose to Add a printer.
  6. The screen will pop up a window. Enter the location where you extract the setup file into previously.
  7. PIXMA MX300 Installation instructions will appear. Follow them all thoroughly to complete the installation.
  8. Once complete, your PIXMA MX300 Printer should be ready for use by now.

METHOD 3: Canon PIXMA MX300 DRIVER INSTALLATION – INSTALLATION CD

Things needed:

  1. A CD/DVD drive-fitted computer.
  2. An installation CD. This CD should come with the package and it contains a Canon MX300 setup files.
  3. A USB cable, used in connecting the computer to the MX300 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon MX300 driver setup file using an installation CD:

  1. Both your computer and the Canon PIXMA MX300 need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the Canon MX300 printer just yet. Wait until you are instructed otherwise.
  3. Place the installation CD inside the CD/DVD drive. The screen will display a setup wizard. Follow the given instructions thoroughly to begin the installation.
  4. You can now plug the USB cable into both your computer and Canon MX300 but only do so after the computer clearly specifies the process.
  5. Give it a time to allow connection to be made. Further instructions are given on-screen. Follow them all thoroughly.
  6. Upon completion of installation, your printer should be ready for use by now.
STEPS OF Canon PIXMA MX300 DRIVER AND SOFTWARE INSTALLATION ON MACOS

Things to pay attention to:

  1. The PIXMA MX300  driver setup file is needed. Download the file first and take note of where the file is stored upon completion of the download process. The folder where the file is stored can be inspected through the computer settings.
  2. Double-click on the downloaded setup file and mount the file on the Disk image.
  3. Double-click on that mounted Disk Image.
  4. Double-click on the packaged driver file. The Canon MX300 drivers installation will start automatically.
STEPS OF Canon MX300 DRIVER AND SOFTWARE INSTALLATION ON LINUX

Things needed:

  1. A computer running on Linux.
  2. A program named CUPS (Common Unix Printer Software), installed on that computer.

Guidelines:

  1. Start the computer and open the CUPS program.
  2. Access the web-based interface on the computer.
  3. Access the browser and access localhost: 631.
  4. Connect the computer to the printer using a USB cable.
  5. Locate the Administration tab in the browser. Choose the tab and choose Printers.
  6. Select Add Printer.
  7. Enter both your username and password.
  8. You should find your Canon MX300 Printer on the list displayed. Select the printer and select Continue.
  9. The CUPS program should detect and add the printer on its own.
  10. The screen pops up a window. Configure your preferred settings on this window. Enter values as needed.
  11. Your Canon PIXMA MX300 Printer should be ready for use by now.

Thank you.

How to Uninstall PIXMA MX300 Driver

  • The first step, Press Windows button, select “Control Panel” to on the Windows
  • Select Canon PIXMA MX300 Drivers or Software and Click on it “Uninstall a Program.”
  • Wait for it to the point your Canon MX300 Driver & Software successfully uninstalled, then push “Finish” button.
Operating SystemVersionSizeDownload
MX300 series CUPS Printer Driver (OS X 10.5/10.6)10.84.2.015 MBDownload
MX300 series CUPS Printer Driver (OS X 10.7/10.8/10.9)10.84.2.014 MBDownload
ICA Driver (OS X 10.6/10.7/10.8/10.9)3.1.08.5 MBDownload
Printer Driver for OSX (Mac OS X 10.2 / 10.3 / 10.4 / 10.56.9.36.6 MBDownload
MX300 series Scanner Driver (OS X 10.5/10.6/10.7/10.8/10.9)13.9.2a6.8 MBDownload
Canon ScanGear for OSX (Mac OS X 10.2 / 10.3 / 10.4 / 10.5 / 10.613.9.17.1 MBDownload
MX300 series MP Driver (Windows 8.1/8/7/Vista/XP/2000)1.0127 MBDownload
MX300 series MP Driver (Windows 8.1 x64/8 x64/ 7 x64/Vista64)1.0128 MBDownload
MX300 series User Manual (Windows)1.1011 MBDownload
MX300 series User Manual (Mac)1.10a39 MBDownload
Canon PIXMA MX300

Choose your Canon PIXMA MX300 Driver Printer below to access the latest downloads including full software, drivers, and User manual. Don’t Worry, The Download Links below for Canon MX300 Printer drivers is active.

Canon PIXMA MX300 Printer Driver Download

[Total: 1    Average: 5/5]