Canon PIXMA MX426 Driver

Canon PIXMA MX426 Driver and Setup Download for Windows, MacOS, and Linux. When you are getting a printer such as Canon PIXMA MX426, the printing resolution is certainly one point that you have to consider. That is since the printing resolution can be thought about as one important aspect of a printer that will certainly aid you to get the best printer that you require, particularly if you intend to utilize the printer to print plenty of photos.

Related Printer Driver: Canon MX420 Driver

OVERVIEWSPECIFICATIONSHOW TO INSTALLDOWNLOAD

Download Canon PIXMA MX426 Multifunction Printer Driver, User’s Manual and Software, Compatible Systems for Windows (64-Bit/32-Bit), MacOS, and Linux.

PIXMA MX426 Printer Specifications

Print  
Maximum Printing Resolution4800 (horizontal) x 1200 (vertical) dpi
Print Head / InkType / Ink System:FINE Cartridge
Total Number of Nozzles:1,472 nozzles
Min. Ink Droplet Size:2pl
Ink Tank:PG-810, CL-811
(PG-810XL, CL-811XL Optional)
Print SpeedDocument: Colour:
ESAT / Simplex:
Approx. 5.0ipm
Document: B/W*2: ESAT / Simplex:Approx. 8.7ipm
Photo (4 x 6″):
PP-201 / Standard / Borderless:
Approx. 42secs.
Printable WidthUp to 203.2mm (8-inch)
Borderless:Up to 216mm (8.5-inch)
Recommended Printing AreaTop margin:31.2mm
Bottom margin:32.5mm
Paper SizeA4, A5, B5, LTR, LGL, 4 x 6″, 5 x 7″, 8 x 10″, Envelopes (DL, COM10)
Scan  
Scanner TypeFlatbed & ADF
Scanning MethodCIS
Optical Resolution1200 x 2400dpi
Selectable Resolution25 – 19200dpi
Scanning Bit Depth (Input / Output)Grayscale:16 / 8 bits
Colour:48 / 24 bits (RGB each 16 / 8 bits)
Line Scanning SpeedGrayscale:1.1ms/line (300dpi)
Colour:3.4ms/line (300dpi)
Scanning SpeedReflective: A4 Colour / 300dpi:Approx. 14secs.
Maximum Document SizeFlatbed:A4, LTR (216 x 297mm)
ADF:A4, LTR, LGL

METHOD 1: Canon MX426 DRIVERS INSTALLATION – DOWNLOADED DRIVER SETUP FILE

For this method, you will not need an installation CD to install the driver of Canon PIXMA MX426 printers.

Things needed:

  1. A file of Canon PIXMA MX426 driver setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the PIXMA MX426 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon PIXMA MX426 driver using the setup file downloaded beforehand:

  1. Both your computer and the Canon MX426 Printer need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the PIXMA MX426 printer just yet. Wait until you are instructed otherwise.
  3. If you have not, download the Canon MX426 drivers setup file. Once done, install the file on your computer. Instructions given on the screen must be followed thoroughly for the file to install properly.
  4. Once installation completes, connect your computer to PIXMA MX426 Printer using the provided USB cable. Your computer should be able to detect the printers automatically. Once detected, more instructions are given.
  5. Displayed instructions should be followed thoroughly to complete the installation.
  6. Canon PIXMA MX426 should be ready for use by now.

METHOD 2: Canon PIXMA MX426 DRIVER INSTALLATION – MANUAL INSTALLATION

For this method, accessing your computer’s Windows’ “Add a printer” feature is required.

Things needed:

  1. A file of Canon MX426 drivers setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the MX426 printers. The cable should come with the package. Check your box for the cable.

Steps of manual installation of Canon PIXMA MX426:

  1. Both your computer and the Canon MX426 Printer need to be turned on first.
  2. You can connect your computer to your Canon PIXMA MX426 printers using the provided USB cable.
  3. Specify a location (folder) on your computer to extract the PIXMA MX426 setup file into. If you can’t find the file, try looking for it on the TEMP folder of your computer.
  4. For Windows 7 and Windows Vista users: open Control Panel, open View Devices & Printer. For Windows XP users: open Fax & Printers.
  5. Choose to Add a printer.
  6. The screen will pop up a window. Enter the location where you extract the setup file into previously.
  7. PIXMA MX426 Installation instructions will appear. Follow them all thoroughly to complete the installation.
  8. Once complete, your PIXMA MX426 Printer should be ready for use by now.

METHOD 3: Canon PIXMA MX426 DRIVER INSTALLATION – INSTALLATION CD

Things needed:

  1. A CD/DVD drive-fitted computer.
  2. An installation CD. This CD should come with the package and it contains a Canon MX426 setup files.
  3. A USB cable, used in connecting the computer to the MX426 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon MX426 driver setup file using an installation CD:

  1. Both your computer and the Canon PIXMA MX426 need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the Canon MX426 printer just yet. Wait until you are instructed otherwise.
  3. Place the installation CD inside the CD/DVD drive. The screen will display a setup wizard. Follow the given instructions thoroughly to begin the installation.
  4. You can now plug the USB cable into both your computer and Canon MX426 but only do so after the computer clearly specifies the process.
  5. Give it a time to allow connection to be made. Further instructions are given on-screen. Follow them all thoroughly.
  6. Upon completion of installation, your printer should be ready for use by now.
STEPS OF Canon PIXMA MX426 DRIVER AND SOFTWARE INSTALLATION ON MACOS

Things to pay attention to:

  1. The PIXMA MX426  driver setup file is needed. Download the file first and take note of where the file is stored upon completion of the download process. The folder where the file is stored can be inspected through the computer settings.
  2. Double-click on the downloaded setup file and mount the file on the Disk image.
  3. Double-click on that mounted Disk Image.
  4. Double-click on the packaged driver file. The Canon MX426 drivers installation will start automatically.
STEPS OF Canon MX426 DRIVER AND SOFTWARE INSTALLATION ON LINUX

Things needed:

  1. A computer running on Linux.
  2. A program named CUPS (Common Unix Printer Software), installed on that computer.

Guidelines:

  1. Start the computer and open the CUPS program.
  2. Access the web-based interface on the computer.
  3. Access the browser and access localhost: 631.
  4. Connect the computer to the printer using a USB cable.
  5. Locate the Administration tab in the browser. Choose the tab and choose Printers.
  6. Select Add Printer.
  7. Enter both your username and password.
  8. You should find your Canon MX426 Printer on the list displayed. Select the printer and select Continue.
  9. The CUPS program should detect and add the printer on its own.
  10. The screen pops up a window. Configure your preferred settings on this window. Enter values as needed.
  11. Your Canon PIXMA MX426 Printer should be ready for use by now.

Thank you.

How to Uninstall PIXMA MX426 Driver

  • The first step, Press Windows button, select “Control Panel” to on the Windows
  • Select Canon PIXMA MX426 Drivers or Software and Click on it “Uninstall a Program.”
  • Wait for it to the point your Canon MX426 Driver and Software successfully uninstalled, then push “Finish” button.
Operating SystemVersionSizeDownload
MX426 series Mini Master Setup (OS X 10.6/10.7/10.8)1.138 MBDownload
MX426 series CUPS Printer Driverfor MacOS 10.12, OS X 10.11, 10.10, 10.9, 10.8, 10.716.10.0.014 MBDownload
MX426 series CUPS Printer Driver (OS X 10.5/10.6)11.7.1.017 MBDownload
ICA Driver (OS X 10.6)3.3.48.6 MBDownload
MX426 series MP Driver (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64)1.0231 MBDownload
MX426 series MP Driver (Windows XP x64)1.0118 MBDownload
Printer Driver for Mac OS X7.34.06.3 MBDownload
MX426 series Scanner Driver for MacOS 10.12, OS X 10.11, 10.10, 10.9, 10.8, 10.7, 10.6, 10.617.7.1c14 MBDownload
MX426 series XPS Printer Driver (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64)5.5622 MBDownload
Linux IJ printer driver source file3.505.9 MBDownload
Linux IJ Printer Driver3.506.9 MBDownload
Linux IJ scanner driver source file1.702.3 MBDownload
Linux IJ Scanner Driver1.703 MBDownload
ICA Driver (OS X 10.7 / 10.8 / 10.9 / 10.10 / 10.11)4.0.07.1 MBDownload
MX426 series User Manual (Windows)1.2016 MBDownload
MX426 series User Manual (OS X 10.4/10.5)1.1034 MBDownload
MX426 series User Manual (Mac)1.1134 MBDownload
Canon PIXMA MX426 Driver

Choose your Canon PIXMA MX426 Driver Printer below to access the latest downloads including full software, drivers, and User manual. Don’t Worry, The Download Links below for Canon MX426 Printer drivers is active.

Canon PIXMA MX426 Printer Driver Download

[Total: 1    Average: 5/5]