Canon PIXMA MX497 Driver

Canon PIXMA MX497 Driver and Setup Download for Windows, MacOS, and Linux. Obtaining the done in one printer is not something hard to obtain. Nonetheless, obtaining the all in one printer such as MX497 Printer is something different. That is because this printer provides you a lot of advantages that you will definitely like, starting from the efficiency to the cost that you have to spend for this printer.

Related Printer Driver: Canon MX476 Driver

OVERVIEWSPECIFICATIONSHOW TO INSTALLDOWNLOAD

Download Canon PIXMA MX497 Multifunction Printer Driver, User’s Manual and Software, Compatible Systems for Windows (64-Bit/32-Bit), MacOS, and Linux.

PIXMA MX497 Printer Specifications

Mono or Colour PrinterColour
Multifunction SummaryPrint/Scan/Copy/Fax
TechnologyMultifunction Inkjet Printer
Case ColourBlack
Dimensions458mm (W) x 385mm (D) x 200mm (H) – Weight 8.4kg
EnvironmentalOperating Temperature 15 to 30C – Humidity 5 to 95%
Noise Level43dbA
Power ConsumptionStandby: Approx. 1.0 W (Wi-Fi connection to PC) Off: Approx. 0.3 W Copying: Approx. 18 W
Product SummaryCanon PIXMA MX497 A4 Colour Inkjet Printer
Product TypeInkjet Printer
Voltage/ Power/ Frequency100 to 240VAC / 50 to 60Hz

METHOD 1: Canon MX497 DRIVERS INSTALLATION – DOWNLOADED DRIVER SETUP FILE

For this method, you will not need an installation CD to install the driver of Canon PIXMA MX497 printers.

Things needed:

  1. A file of Canon PIXMA MX497 driver setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the PIXMA MX497 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon PIXMA MX497 driver using the setup file downloaded beforehand:

  1. Both your computer and the Canon MX497 Printer need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the PIXMA MX497 printer just yet. Wait until you are instructed otherwise.
  3. If you have not, download the Canon MX497 drivers setup file. Once done, install the file on your computer. Instructions given on the screen must be followed thoroughly for the file to install properly.
  4. Once installation completes, connect your computer to PIXMA MX497 Printer using the provided USB cable. Your computer should be able to detect the printers automatically. Once detected, more instructions are given.
  5. Displayed instructions should be followed thoroughly to complete the installation.
  6. Canon PIXMA MX497 should be ready for use by now.

METHOD 2: Canon PIXMA MX497 DRIVER INSTALLATION – MANUAL INSTALLATION

For this method, accessing your computer’s Windows’ “Add a printer” feature is required.

Things needed:

  1. A file of Canon MX497 drivers setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the MX497 printers. The cable should come with the package. Check your box for the cable.

Steps of manual installation of Canon PIXMA MX497:

  1. Both your computer and the Canon MX497 Printer need to be turned on first.
  2. You can connect your computer to your Canon PIXMA MX497 printers using the provided USB cable.
  3. Specify a location (folder) on your computer to extract the PIXMA MX497 setup file into. If you can’t find the file, try looking for it on the TEMP folder of your computer.
  4. For Windows 7 and Windows Vista users: open Control Panel, open View Devices & Printer. For Windows XP users: open Fax & Printers.
  5. Choose to Add a printer.
  6. The screen will pop up a window. Enter the location where you extract the setup file into previously.
  7. PIXMA MX497 Installation instructions will appear. Follow them all thoroughly to complete the installation.
  8. Once complete, your PIXMA MX497 Printer should be ready for use by now.

METHOD 3: Canon PIXMA MX497 DRIVER INSTALLATION – INSTALLATION CD

Things needed:

  1. A CD/DVD drive-fitted computer.
  2. An installation CD. This CD should come with the package and it contains a Canon MX497 setup files.
  3. A USB cable, used in connecting the computer to the MX497 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Canon MX497 driver setup file using an installation CD:

  1. Both your computer and the Canon PIXMA MX497 need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the Canon MX497 printer just yet. Wait until you are instructed otherwise.
  3. Place the installation CD inside the CD/DVD drive. The screen will display a setup wizard. Follow the given instructions thoroughly to begin the installation.
  4. You can now plug the USB cable into both your computer and Canon MX497 but only do so after the computer clearly specifies the process.
  5. Give it a time to allow connection to be made. Further instructions are given on-screen. Follow them all thoroughly.
  6. Upon completion of installation, your printer should be ready for use by now.
STEPS OF Canon PIXMA MX497 DRIVER AND SOFTWARE INSTALLATION ON MACOS

Things to pay attention to:

  1. The PIXMA MX497  driver setup file is needed. Download the file first and take note of where the file is stored upon completion of the download process. The folder where the file is stored can be inspected through the computer settings.
  2. Double-click on the downloaded setup file and mount the file on the Disk image.
  3. Double-click on that mounted Disk Image.
  4. Double-click on the packaged driver file. The Canon MX497 drivers installation will start automatically.
STEPS OF Canon MX497 DRIVER AND SOFTWARE INSTALLATION ON LINUX

Things needed:

  1. A computer running on Linux.
  2. A program named CUPS (Common Unix Printer Software), installed on that computer.

Guidelines:

  1. Start the computer and open the CUPS program.
  2. Access the web-based interface on the computer.
  3. Access the browser and access localhost: 631.
  4. Connect the computer to the printer using a USB cable.
  5. Locate the Administration tab in the browser. Choose the tab and choose Printers.
  6. Select Add Printer.
  7. Enter both your username and password.
  8. You should find your Canon MX497 Printer on the list displayed. Select the printer and select Continue.
  9. The CUPS program should detect and add the printer on its own.
  10. The screen pops up a window. Configure your preferred settings on this window. Enter values as needed.
  11. Your Canon PIXMA MX497 Printer should be ready for use by now.

Thank you.

How to Uninstall PIXMA MX497 Driver

  • The first step, Press Windows button, select “Control Panel” to on the Windows
  • Select Canon PIXMA MX497 Drivers or Software and Click on it “Uninstall a Program.”
  • Wait for it to the point your Canon MX497 Driver and Software successfully uninstalled, then push “Finish” button.
Operating SystemVersionSizeDownload
MX497 series Full Driver & Software Package (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)01.0150 MBDownload
MX497 series MP Drivers (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64)01.0232 MBDownload
MX497 series CUPS Printer Driver MacOS 10.13, 10.12, OS X 10.11, 10.10, 10.9, 10.8, 10.716.20.0.014 MBDownload
MX497 series XPS Printer Driver (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64)0,26736111118 MBDownload
MX497 series Full Driver & Software Package MacOS 10.13, 10.12, OS X 10.11, 10.10, 10.9, 10.8, 10.701.0416 MBDownload
ICA Driver for MacOS 10.13, 10.12, OS X 10.11, 10.10, 10.9, 10.8, 10.74.1.3a1.7 MBDownload
IJ Printer Driver for Linux (debian Packagearchive)05.10515 KBDownload
IJ Printer Driver for Linux (rpm Packagearchive)05.10269 KBDownload
IJ Printer Driver for Linux (Source file)05.10395 KBDownload
ScanGear MP for Linux (debian Packagearchive)03.10236 KBDownload
ScanGear MP for Linux (rpm Packagearchive)03.10213 KBDownload
ScanGear MP for Linux (Source file)03.10204 KBDownload
MX497 series (PDF) User Manual (Windows)01.0015 MBDownload
MX497 series (PDF) User Manual (Mac)01.0011 MBDownload
MX497 series Getting Started Guide (software installation part)V13.4 MBDownload
MX497 series Getting Started Guide (device setup part)V11.6 MBDownload
MX497 series Getting Started Guide (device setup part)V11.6 MBDownload
ScanGear MP for Linux (Operation guide)03.1085 KBDownload
IJ Printer Driver for Linux (Operation guide)05.1072 KBDownload
Canon PIXMA MX497 Driver

Choose your Canon PIXMA MX497 Driver Printer below to access the latest downloads including full software, drivers, and User manual. Don’t Worry, The Download Links below for Canon MX497 Printer drivers is active.

Canon PIXMA MX497 Printer Driver Download

[Total: 1    Average: 5/5]