Epson Stylus Pro 9700 Driver Windows Linux Manual

Epson Stylus Pro 9700 Driver, User’s Manual Guide for Windows, Linux and MacOs. This Printer is packed with the latest Epson modern technologies that add precision, dependability as well as performance to a vast array of expert printing demands. With each other they provide you the finest high-quality result without jeopardizing speed.

Related Printer Driver: Epson 9600 Driver

OVERVIEWSPECIFICATIONSHOW TO INSTALLDOWNLOAD

Download Epson Stylus Pro 9700 Printer Driver, User’s Manual and Software, Compatible Systems for Windows (64-Bit/32-Bit), MacOS, and Linux.

Stylus Pro 9700 Printer Specifications

  1. Ink Technology: Ultrachrome
  2. Paper Formats:  44 ” (111.8 cm), 24 ” (61.0 cm), 17 ” (43.2 cm), B4, B3, B2, B1, A4, A3, A3+, A2, A1, A0
  3. Print Margins Sheet: Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left)
  4. Printing Resolution: 2,880 x 2,880 DPI

METHOD 1: Epson 9700 DRIVERS INSTALLATION – DOWNLOADED DRIVER SETUP FILE

For this method, you will not need an installation CD to install the driver of Epson Stylus Pro 9700 printers.

Things needed:

  1. A file of Epson Stylus Pro 9700 driver setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the Stylus Pro 9700 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Epson Stylus Pro 9700 driver using the setup file downloaded beforehand:

  1. Both your computer and the Epson 9700 Printer need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the Stylus Pro 9700 printer just yet. Wait until you are instructed otherwise.
  3. If you have not, download the Epson 9700 drivers setup file. Once done, install the file on your computer. Instructions given on the screen must be followed thoroughly for the file to install properly.
  4. Once installation completes, connect your computer to Stylus Pro 9700 Printer using the provided USB cable. Your computer should be able to detect the printers automatically. Once detected, more instructions are given.
  5. Displayed instructions should be followed thoroughly to complete the installation.
  6. Epson Stylus Pro 9700 should be ready for use by now.

METHOD 2: Epson Stylus Pro 9700 DRIVER INSTALLATION – MANUAL INSTALLATION

For this method, accessing your computer’s Windows’ “Add a printer” feature is required.

Things needed:

  1. A file of Epson 9700 drivers setup downloaded beforehand. The setup file is downloadable on the link below.
  2. A USB cable, used in connecting the computer to the 9700 printers. The cable should come with the package. Check your box for the cable.

Steps of manual installation of Epson Stylus Pro 9700:

  1. Both your computer and the Epson 9700 Printer need to be turned on first.
  2. You can connect your computer to your Epson Stylus Pro 9700 printers using the provided USB cable.
  3. Specify a location (folder) on your computer to extract the Stylus Pro 9700 setup file into. If you can’t find the file, try looking for it on the TEMP folder of your computer.
  4. For Windows 7 and Windows Vista users: open Control Panel, open View Devices & Printer. For Windows XP users: open Fax & Printers.
  5. Choose to Add a printer.
  6. The screen will pop up a window. Enter the location where you extract the setup file into previously.
  7. Stylus Pro 9700 Installation instructions will appear. Follow them all thoroughly to complete the installation.
  8. Once complete, your Stylus Pro 9700 Printer should be ready for use by now.

METHOD 3: Epson Stylus Pro 9700 DRIVER INSTALLATION – INSTALLATION CD

Things needed:

  1. A CD/DVD drive-fitted computer.
  2. An installation CD. This CD should come with the package and it contains a Epson 9700 setup files.
  3. A USB cable, used in connecting the computer to the 9700 printers. The cable should come with the package. Check your box for the cable.

Steps of installing Epson 9700 driver setup file using an installation CD:

  1. Both your computer and the Epson Stylus Pro 9700 need to be turned on first.
  2. You should not plug in the USB cable to either your computer or the Epson 9700 printer just yet. Wait until you are instructed otherwise.
  3. Place the installation CD inside the CD/DVD drive. The screen will display a setup wizard. Follow the given instructions thoroughly to begin the installation.
  4. You can now plug the USB cable into both your computer and Epson 9700 but only do so after the computer clearly specifies the process.
  5. Give it a time to allow connection to be made. Further instructions are given on-screen. Follow them all thoroughly.
  6. Upon completion of installation, your printer should be ready for use by now.
STEPS OF Epson Stylus Pro 9700 DRIVER AND SOFTWARE INSTALLATION ON MACOS

Things to pay attention to:

  1. The Stylus Pro 9700  driver setup file is needed. Download the file first and take note of where the file is stored upon completion of the download process. The folder where the file is stored can be inspected through the computer settings.
  2. Double-click on the downloaded setup file and mount the file on the Disk image.
  3. Double-click on that mounted Disk Image.
  4. Double-click on the packaged driver file. The Epson 9700 drivers installation will start automatically.
STEPS OF Epson 9700 DRIVER AND SOFTWARE INSTALLATION ON LINUX

Things needed:

  1. A computer running on Linux.
  2. A program named CUPS (Common Unix Printer Software), installed on that computer.

Guidelines:

  1. Start the computer and open the CUPS program.
  2. Access the web-based interface on the computer.
  3. Access the browser and access localhost: 631.
  4. Connect the computer to the printer using a USB cable.
  5. Locate the Administration tab in the browser. Choose the tab and choose Printers.
  6. Select Add Printer.
  7. Enter both your username and password.
  8. You should find your Epson 9700 Printer on the list displayed. Select the printer and select Continue.
  9. The CUPS program should detect and add the printer on its own.
  10. The screen pops up a window. Configure your preferred settings on this window. Enter values as needed.
  11. Your Epson Stylus Pro 9700 Printer should be ready for use by now.

Thank you.

How to Uninstall Stylus Pro 9700 Driver

  • The first step, Press Windows button, select “Control Panel” to on the Windows
  • Select Epson Stylus Pro 9700 Drivers or Software and Click on it “Uninstall a Program.”
  • Wait for it to the point your Epson 9700 Driver & Software successfully uninstalled, then push “Finish” button.
  • Stylus Pro 9700 driver For Windows 10, 8.1,  8, 7,  XP, Vista 64-bitDownload (25.87 MB)
  • Stylus Pro 9700 driver For Windows 10, 8.1,  8, 7,  XP, Vista 32-bit Download (24.31 MB)
  • MacOS 10.13.x, 10.12.x, 10.11.x, 10.10.x, 10.9.x, 10.8.x, 10.7.x, 10.6.x, 10.5.x, Download(47.9 MB)
  • Epson Stylus Pro 9700 Driver For Linux rpm and Debian Download (5,43 MB)
  • Epson Stylus Pro 9700 Setup and User’s Manual Guide Download (10.8 MB)
Epson Stylus Pro 9700

Choose your Epson Stylus Pro 9700 Driver Printer below to access the latest downloads including full software, drivers, and User manual. Don’t Worry, The Download Links below for Epson 9700 Printer drivers is active.

Epson Stylus Pro 9700 Printer Driver Download

[Total: 2    Average: 5/5]